A Fast, Efficient and Friendly Building and Maintenance Service You Can Depend On.
Fire Door Supply, Installation & Upgrades
Fire Door Supply, Installation & Upgrades In Denbighshire
Quirks supply and install a full range of internal fire doors from Howdens, professionally fitted to meet current fire safety and building regulations. Whether you are a homeowner, landlord, HMO operator or commercial client, we can survey, supply and install fully compliant fire doors throughout your property.
You choose the door style from the Howdens range – we handle everything else, from survey to installation and certification.
Fire Do or Compliance & Safety in Denbighshire
All fire door installations are carried out with compliance, life safety and long-term performance in mind. A fire door is only effective when the complete door set is installed correctly and maintained properly.
Our installations typically include:
• Correctly specified FD30 or FD30S fire door leaf
• Compatible fire-rated frames and linings
• Intumescent strips and cold smoke seals
• Fire-rated hinges, latches, locks and closers
• Correct gap tolerances around the door
• Fire-rated ironmongery and signage where required
• Fire stopping and sealing around the frame perimeter
We work in line with current Building Regulations and relevant fire safety guidance, including Approved Document B and BS 8214 guidance for timber-based fire door assemblies.
We can also liaise directly with:
• Building Control
• Fire risk assessors
• Landlords and managing agents
• HMO licensing departments
• Commercial facilities managers
What Is an FD30 Fire Door in Denbighshire?
-
An FD30 fire door is designed and tested to resist fire for 30 minutes when correctly installed.
It helps to:- • Protect escape routes
- • Slow the spread of fire and smoke
- • Give occupants more time to evacuate
FD30 doors are typically required:
- • Between a house and attached garage
- • In loft conversions and stair enclosures
- • In HMOs and rental properties
- • In flats, communal areas and many commercial premises
Common Fire Door Problems We Regularly Find
Many existing fire doors fail inspections due to poor installation, wear over time or incorrect alterations.
Common issues include:
• Excessive gaps around the door
• Missing smoke seals or intumescent strips
• Damaged or loose hinges
• Doors not self-closing correctly
• Hollow non-fire-rated doors installed where FD30 doors are required
• Excessive trimming to the door leaf
• Incorrect locks, latches or handles
• Warped or damaged doors
• Frames with movement or poor fitting
• Fire doors wedged open
• Closers disconnected or removed
These issues are commonly identified during:
• Fire risk assessments
• HMO inspections
• Homebuyer surveys
• Insurance inspections
• Building Control inspections
Understanding FD30 & FD30S Fire Doors
An FD30 fire door is designed and tested to resist fire for up to 30 minutes when correctly installed as part of a complete fire door set.
An FD30S fire door includes additional cold smoke seals to help restrict the spread of smoke as well as fire.
Fire doors help to:
• Protect escape routes
• Slow the spread of fire and smoke
• Improve compartmentation within the building
• Give occupants more time to evacuate safely
• Reduce damage to adjoining areas
FD30 and FD30S doors are commonly required in:
• Loft conversions
• Integral garage access doors
• HMOs and shared accommodation
• Flats and apartment buildings
• Commercial buildings
• Protected stairwells and corridors
• Plant rooms and service cupboards
Why Correct Fire Door Installation Matters
Even high-quality fire doors can fail if installed incorrectly.
Incorrect fitting can seriously reduce fire resistance and may result in failed inspections or non-compliance with fire safety regulations.
Common installation mistakes include:
• Incorrect hinge quantities or ratings
• Poor frame fixing
• Incorrect clearances around the door
• Missing intumescent protection
• Non-compliant glazing systems
• Incorrect closer installation
• Incompatible ironmongery
• Lack of perimeter fire stopping around the frame
Our installations are carried out with attention to detail to help ensure the complete assembly performs correctly in the event of a fire.
Fire Doors for Landlords, HMOs & Commercial Buildings
We regularly carry out fire door upgrades and installations for:
• HMOs
• Rental properties
• Apartment blocks
• Schools and colleges
• Offices and commercial premises
• Housing associations
• Managed buildings
• Retail units
• Industrial buildings
We understand the importance of:
• Fire risk assessment compliance
• HMO licence requirements
• Ongoing maintenance records
• Tenant safety
• Minimising disruption in occupied buildings
We can also assist with phased upgrades where multiple doors require replacement over time.
Fire Doors We Supply from Howdens 🚪
We can supply and install any internal Howdens fire door you choose, including:
White Moulded FD30 Fire Doors in Denbighshire
Traditional panelled designs that look like standard white internal doors but with a fire-rated core. Ideal for:
- • Typical houses
- • HMOs and rentals
- • Flats and corridors
Oak Veneer FD30 Fire Doors in Denbighshire
High-end oak veneer finishes for a more premium look. Ideal for:
- • Higher-spec homes
- • Entrance lobbies
• Offices and commercial interiors
Flush FD30 Fire Doors in Denbighshire
Simple, modern flush doors – great for:
- • Plant rooms
- • Communal areas
- • Commercial corridors
• Minimalist interiors
Glazed FD30 Fire Doors in Denbighshire
Where natural light and visibility are important we can supply FD30 doors with certified fire glass:
- • Glazed panels for hallways and kitchens
• Vision panels for commercial routes and offices
Howdens Fire Door Range – Catalogue Preview 📘
From the Howdens internal fire door range, we can supply:
- • White moulded FD30 panel doors
- • Smooth and grained finishes
- • Oak veneer FD30 doors in various designs
- • Flush plywood or foil-wrapped FD30 doors
- • Glazed FD30 doors with clear fire glass
- • Pre-finished or primed options ready for decorating
If you have seen a door you like on the Howdens website or in branch, send us the product name or a screenshot and we will price to supply and fit.
Typical Locations for Internal Fire Doors in Denbighshire
We regularly install internal fire doors for:
- • Loft conversions and stair enclosures
- • Between houses and integral garages
- • Protected escape routes in HMOs and flats
- • Entrance doors to flats in communal areas
- • Commercial corridors, risers and plant rooms
• Kitchens and high-risk rooms in shared houses
Fire-Rated Ironmongery & Accessories 🔩
We can supply and install a complete fire door set, including:
- • Fire-rated hinges
- • Fire-rated latches and locks
- • Intumescent hinge pads and lock kits
- • Intumescent and cold smoke seals
- • Overhead door closers
- • Fire-rated letterboxes and viewers
- • Thresholds and drop-down seals
- • FD30 signage where required
All ironmongery is selected to match the fire rating and door specification.
Fire Doors for HMOs and Landlords in Denbighshire🏘️
We install full HMO fire door packages, including:
- • FD30 bedroom doors
- • FD30 kitchen and living room doors
- • Fire doors to cupboards containing electrics or boilers (where required)
- • Door closers to escape route doors
- • Intumescent strips and smoke seals
- • Thumb-turn locks or suited locks where needed
We work closely with landlords and can align with local council licence conditions and fire risk assessments.
Fire Door Maintenance & Annual Checks in Denbighshire🔧
Fire doors need regular checks to remain compliant. Over time, buildings move, hinges wear and gaps can increase.
We can carry out one-off or annual checks, including:
- • Confirming gaps are within tolerance
- • Checking the condition of intumescent strips and smoke seals
- • Checking hinges, latches and closers for wear
- • Confirming the door closes fully and latches every time
- • Inspecting frames and linings for damage or movement
Ideal for HMOs, rented properties, offices, schools and managed buildings.
Fire Door Inspection Reports in Denbighshir 🔍
For larger properties, we can provide written inspection reports, including:
- • Door-by-door condition and compliance comments
- • Photographs where required
- • Recommended remedial works
- • Priority levels for repairs
Useful for:
- • Fire risk assessments
- • Landlord licence conditions
- • Housing associations and councils
Commercial and block management
Why Choose Quirks Property Maintenance Ltd for Fire Doors?
- ✓ Site surveys undertaken across Denbighshire
✓ Supply and installation of FD30 and FD60 fire doors
✓ Internal fire door upgrades and replacements
✓ Fire door inspections and compliance assessments
✓ Experienced joinery fitting services
✓ Fire-rated door frames and complete door sets
✓ Installation of intumescent heat and cold smoke seals
✓ Commercial, HMO and residential fire door works undertaken
✓ Assistance with fire risk assessment remedial works
✓ BWF-trained for Fire door installation awareness
✓ FIRE QUAL trained in Fire door inspections
✓ High-quality Grade 2, 3, 4 and 5 fire doors available
✓ Bespoke manufacturing services available where required
✓ Compliance-focused installations carried out with attention to detail
✓ Fully insured local company serving Denbighshire
Example Fire Door Packages
You can structure customer pricing or internal quoting using:
- • Fire door upgrade to existing frame Supply and fit FD30 door leaf, hinges, latch, intumescent/smoke seals and closer to a suitable existing frame.
- • Complete fire door set Supply and fit FD30 door, new fire-rated linings, architraves, seals, hinges, latch, closer and ironmongery.
• Glazed FD30 hallway door Supply and fit glazed FD30 door to hallway or kitchen to allow light through while maintaining a protected route.
Fire Door Supply, Installation & Upgrades
-
Case Study 1 – HMO Conversion, Chester
A three-storey property was being converted into an HMO.- • Replaced standard internal doors with FD30 panelled fire doors to bedrooms and escape routes
- • Installed overhead door closers, intumescent strips and smoke seals
- • Coordinated with building control and the council housing officer for final sign-off
Outcome: property achieved licence requirements and improved fire safety for tenants.
Case Study 2 – House-to-Garage Door, Wirral
Client needed to address a homebuyer survey which flagged a non-compliant door between the kitchen and integral garage.- • Removed old lightweight door
- • Supplied and installed a flush FD30 fire door with self-closer and intumescent seals
Outcome: compliant separation between house and garage, with paperwork available for solicitors and insurers.
Case Study 3 – Communal Corridor Doors, North Wales
A small block of flats required upgraded fire doors to communal corridors.- • Surveyed existing frames and ironmongery
- • Supplied and installed FD30 doors with vision panels, closers and signage
- • Adjusted frames and made minor repairs to surrounding plasterwork
Outcome: improved fire separation to corridors and stairs, helping satisfy the fire risk assessment.
Fire Door Inspections & Compliance Surveys
If you are unsure whether your fire doors are compliant, we can carry out inspections and provide practical guidance on any remedial works required.
Our surveys can include:
• Gap measurements
• Seal inspections
• Closer operation testing
• Ironmongery checks
• Frame condition checks
• Smoke seal inspections
• Door leaf condition assessment
• Photographs and defect reporting
• Recommendations for upgrades or repairs
This is particularly useful for:
• Landlords
• HMO operators
• Managing agents
• Commercial property owners
• Buyers following survey reports
• Buildings undergoing fire risk assessments
Areas We Cover
We supply and install fire doors across:
- • North Wales
- • Cheshire
- • Wirral
Including Chester, Flintshire, Mold, Buckley, Connah’s Quay, Deeside, Wrexham, Prestatyn, Rhyl, Ellesmere Port, Neston, Heswall, Birkenhead, Wallasey, Hoylake and surrounding areas.
Frequently Asked Questions
Do all fire doors need closers?
Most doors on escape routes require a self-closer so that the door returns to the fully closed position automatically.
Can you fit fire doors to existing frames?
Yes, if the frame is suitable, in good condition and can meet the required fire rating and gap tolerances. Otherwise we recommend new linings.
Can you install glazed fire doors?
Yes, but we only use doors and glass units that are specifically tested and rated together as a system.
How long does fitting a fire door take?
Typically around 1–2 hours per door, depending on the condition of the opening, frame and surrounding finishes.
Do you remove and dispose of old doors?
Yes, we can include removal and disposal of existing doors and waste within our quotation.
Can you advise where fire doors are needed?
We can give practical guidance based on typical layouts and regulations, and work alongside your fire risk assessor or building control officer.
Failed Fire Door Inspection or Urgent Compliance Issue?
If you have recently:
• Failed a fire risk assessment
• Received an HMO enforcement notice
• Had issues flagged during a survey
• Been advised to upgrade communal fire doors
• Been told gaps or seals are non-compliant
We can arrange surveys across Wrexham and provide practical upgrade recommendations.
Same-day or next-day visits may be available depending on location and workload.
🔥📞 Get a Fire Door Quote in Denbighshire?
If you already know which Howdens fire door you want, send us the product name or a screenshot and we will price to supply and install.
If you are not sure, we can visit, measure up and recommend the best options for your property and compliance requirements.
Get in Touch
Send Photos via WhatsApp for a quick assessment.
Our Commitment
All works are carried out to ensure safety, durability, and compliance with current regulations.
