Specialist Building & Property Maintenance Services You Can Depend On.
Floor repairs — Flintshire & Deeside
Floor repairs across Flintshire and Deeside, from Connah’s Quay and Shotton to Mold and Holywell: floor joists damaged by leaks or wet rot cut out and replaced with new structural timber on galvanised hangers, worn boards and failed chipboard decks re-laid, and solid floors made good. Deeside is home ground, and a kitchen floor gone soft over a leak is a job we have done before.

In short: Across Flintshire and Deeside, bouncy, sagging and broken floors opened up and put right — joists, floorboards, chipboard decks and solid concrete floors; sound joists kept, and most repairs priced from your photographs.
Flintshire floors
Flintshire’s housing is a real mix: terraces along the Deeside industrial belt through Connah’s Quay, Shotton and Queensferry, older stone and rendered properties in Mold, Holywell and the villages, and large post-war and modern estates in Buckley, Hawarden and Ewloe. Across most of that stock the ground floors are suspended timber — joists over a void — and most upstairs floors are timber, so the same failures turn up again and again: boards worn out or working loose, chipboard decks breaking down, and floors going bouncy or uneven underfoot.
Water is the other cause worth naming. A slow leak from a kitchen or bathroom can sit unnoticed in a floor void for a long time, and where timber stays wet, wet rot can take hold in the joists. A bouncy or sagging floor is a symptom, not a diagnosis — the only way to find out which of these you have is to open the floor up and look, which is exactly how the project below started.
We cover the CH1 to CH4 postcode districts in Chester, CH65 and CH66 in Ellesmere Port, and the villages around them.
Flintshire — detached house
FLINTSHIRE — DETACHED HOUSE
The kitchen floor in this detached house in Flintshire had become bouncy and uneven underfoot. The cause was underneath it: a leak had got water to the timber, and wet rot had taken hold in the floor joists under part of the kitchen. That section of floor had lost its support and needed renewing.
A bouncy or sagging floor is a symptom, not a diagnosis, and the only way to find out why is to get underneath it. With the floor opened up, the problem was plain: the original joists in the affected section had rotted, and could no longer carry the floor properly.
Quirks inspected the floor and specified the repair; there was no structural engineer involved. Only part of the kitchen floor was renewed — the rest of it was kept.

The rotten timber was cut out and new joists were fitted across the section, each carried on a new galvanised joist hanger. The new joists are stress-graded structural timber — the C16 grade stamp is visible on one of them in the photograph below.
A row of noggins went in between the joists to brace them and give the new floor a stiff, even frame. The kitchen units either side stayed where they were while the work went on between them.

The new frame was decked in plywood, giving a solid, flat surface across the repaired section where it meets the existing floor.
The photograph below shows the floor at that stage, before any floor covering went down.

This case study covers the structural repair to the kitchen floor: cutting out the rotten timber, fitting new joists, hangers and noggins, and decking the repaired section in plywood. The leak that caused the rot is not part of this write-up, and neither is the final floor covering. For more on how Quirks deals with timber decay, see our wet rot treatment page.
| Location | Flintshire |
| Property | Detached house |
| Room | Kitchen |
| Issue | Bouncy, uneven floor |
| Cause | Wet rot in the floor joists, caused by a leak |
| Diagnosis | Quirks — no structural engineer involved |
| Works | Rotten timber cut out; new joists on galvanised hangers; noggins; plywood deck |
| Extent | Part of the kitchen floor |
★★★★★ 5.0 · 150+ Google reviews
“Quirks have fixed my floor and it looks amazing! It needed sealing and skimming and as you can see from the pictures, the work is brilliant. I found them super easy to sort things with and they were able to fit me in around other jobs so I didn’t even have to wait. Would absolutely recommend them. I posted a few pics as I wanted to show the before and after of the work they have completed”
Amy Parkinson
“We needed urgent work on some floorboards to keep a project on track, Quirks were fast to respond and the quality of work was excellent. Highly recommend.”
Rick K
“We had two walls removed ( with one needing RSJ) to create a more open kitchen/diner/ living area. Also, new flooring and new kitchen/utility area were fitted. This was a fairly large space. Right from our first meeting with Mike, we were very happy with the high level of professionalism shown by Quirks which gave us confidence to go with them. This company is very organised and gives clear information about when the project will start and what will be involved. Quotes for the work were also provided promptly and any changes communicated clearly throughout the process, including some good advice when needed. The management of the project by Mike was excellent, which took out a lot of the stress we might have had otherwise! The team were always on time, polite and friendly, worked hard and aimed to cause minimal disruption. The site was left tidy at the end of each day which was so helpful. We are so pleased with the work which has been completed to a very high standard- Quirks have some very skilled joiners.Would highly recommend Quirks and would definitely use again in the future.”
Susan Lloyd-Williams
How we work
Most floor repairs are priced from your photographs, and opening the floor up is the first stage of the work itself. Once the boards are up we confirm what has failed: joists that are sound stay exactly as they are; where timber has failed, the affected lengths are cut out and new structural timber goes in, typically on galvanised hangers; where the boarding has failed, the room is re-boarded in chipboard sheets or new floorboards, whichever the room should have. If the open floor shows more than the photographs did, you hear it from us before the repair carries on.
The working area is protected before anything comes up, the void is checked while it is open, and the waste — old boards, cut-out timber — leaves with us. What we found and what we recommend goes to you in a written quotation before any repair starts.
Floor repairs sit alongside the rest of what we do as one contractor: where the open floor shows a damp problem, our damp floor treatments in Flintshire page covers it, and the floor repair services page covers the full service.
One contractor

Floors: boards, decks and joists opened up, put right and boarded over

Water damage: drying equipment in first, then the floor repair

Joists: renewed where they have failed, kept where they are sound

Finished: the floor done and the room back in use
Your questions
From the room above, usually nothing — just a floor going bouncy, soft or uneven. Under the boards, wet rot shows as timber that is darkened, softened or breaking up where it has stayed wet. If your floor has gone springy and there has been a leak anywhere nearby, say so when you send the photographs: it changes where we look.
Often, yes. In the project above the units stayed in place on both sides while the floor between them was cut out, re-joisted and decked. Whether that is possible on your floor depends on where the damage runs, and the written quotation says so.
Yes — Deeside is home ground. Connah’s Quay, Shotton, Queensferry, Hawarden and the rest of the Deeside belt are on our doorstep.
Flintshire falls under the Building Regulations as they apply in Wales. Whether Building Regulations or Building Control involvement is required depends on the scope of work. We will explain the position for your proposed repair and, where agreed, coordinate the process with the relevant parties.
It depends on what has failed: the size of the area, whether the joists are affected or only the boards, access to the sub-floor, and the boarding the room needs. Most jobs we can price from photographs — send yours on WhatsApp or by email and we’ll come back with a written quotation.
Only if they have failed. On many of the floors we open up the joists are kept exactly as they are and the work is the boarding. Where rot or damage has taken hold, the affected timber is cut out and new structural timber goes in, typically on galvanised hangers — and we tell you which it is before the work starts.
Written and reviewed by Michael Quirk, Director.
How it works
You don’t need to describe the problem down the phone. A photo tells us most of what we need.

Tell us which room, roughly how big the area is and what the floor is doing — bouncing, dipping, boards breaking up — and attach a photograph or a short video. We will come back with a written quotation.
FLOOR REPAIRS — FLINTSHIRE — SEND US PHOTOGRAPHS
Send us photos of the issue via WhatsApp or email, along with a brief description. Our team will review your enquiry and get back to you as soon as possible.
