Specialist Building & Property Maintenance Services You Can Depend On.
Structural repairs · Crack stitching · Concrete repair · Lintels
Cracked and stepped brickwork stitched with helical bars, spalling concrete cut back to sound material and rebuilt, failed lintels and arches replaced, and the wall or structure made good afterwards — structural repairs across North Wales, Cheshire and Wirral, to an engineer’s specification where one is needed.

In short: A crack is a symptom. We repair the masonry or concrete so it is sound again, and where the cause needs investigating we say so before any repair is priced. Send photographs of the crack, from close up and from across the room or street, and we will tell you which it is.
One contractor
A structural repair rarely ends at the crack. We do what comes after it too.
Stainless steel helical bars bedded in resin across cracked masonry, run into sound wall either side, so the two halves act as one again.
Spalled, cracked or corroded concrete cut back to sound material, the reinforcement treated, and the section rebuilt with a repair mortar.
Failed steel, concrete and timber lintels replaced, and cracked brick arches rebuilt; see lintel repair and replacement.
Render, pointing, plaster and decoration-ready finishes after the repair, so the wall looks like a wall again.
How the repair works
Slots are cut into the horizontal mortar joints across the line of the crack, at intervals up its height, and cleaned out. Stainless steel helical bars are bedded into the slots in a resin grout and run well past the crack into sound masonry on both sides, so each bar ties the two halves of the wall together across the fracture. The joints are then pointed up and the wall made good; from the outside there is nothing to see.
It works because the bars take the tension across the crack that the mortar can no longer carry. It does not work if the crack is still moving for a reason nobody has looked at, which is why a wide, stepped or recurring crack is looked at first. Where the cause is not obvious we say so and suggest a structural engineer’s assessment before pricing the repair; where it is, we quote from your photographs.
Concrete fails from the inside out. Water reaches the steel reinforcement, the steel rusts and expands, and the concrete over it cracks and falls away: the brown-stained, blown patches on a lintel, sill or balcony edge. The repair is to cut the damaged concrete back to sound material, clean and treat the exposed steel, and rebuild the section with a cementitious repair mortar that bonds to the old and protects the steel. Where the reinforcement has lost too much section the engineer specifies how it is replaced.

Chester — block of flats, rendered elevation
CHESTER — BLOCK OF FLATS, RENDERED ELEVATION
A vertical crack had opened through the render on the side elevation of a two-storey block of flats in Chester, running down from under the concrete coping on the parapet. Around it the render had blown away from the wall behind. The crack was stitched with helical bars, the loose render cut out and the patch re-rendered, from a scaffold on the pavement. The cause of the crack was not investigated as part of this job and is not stated here.
The crack ran straight down from the underside of the parapet coping, where the render meets the top of the wall, and had opened the render along its length. Below it a patch of render had blown and fallen away, leaving the bare wall showing through. That is the point at which a cosmetic crack becomes a weather problem: once the render is off, water gets behind the rest.
Because the crack was at high level on a street elevation, the first job was the scaffold. The block sits on the pavement with parking alongside, so the scaffold was put up with the pavement edge coned and a barrier at the road, and left clear for people to pass.
With the scaffold up, the render was cut back in a stepped pattern around the crack, far enough to get to sound render on all sides, and the masonry behind it exposed. Slots were then cut into the horizontal joints across the line of the crack and cleaned out, and stainless steel helical bars bedded into them in resin, run past the crack into sound wall on both sides so each bar ties the two halves together.
The third photograph shows that stage: the render removed in a stepped outline, the bars set in their slots across the crack, and the crack itself still visible between them before the patch was built back up.
The patch was built back up in a sand and cement render, keyed to the existing and finished to match the surrounding texture, so it will take the same paint as the rest of the elevation. The fourth photograph shows it from the scaffold, still unpainted; the fifth is the elevation from the street with both repaired areas visible on the upper wall.
Decoration of the repaired areas was left to the customer.





This study covers the scaffold, the crack stitching and the render repair. The cause of the crack was not investigated as part of the work and no engineer was involved; where a crack is wide, stepped or recurring, we would advise a structural engineer’s assessment before any repair is priced. Decoration was for the customer.
| Location | Chester |
| Property | Two-storey block of flats, rendered with brick above |
| Issue | Vertical crack through the render below the parapet coping; render blown around it |
| Cause | Not investigated as part of this job |
| Work | Helical bar crack stitching and render repair, from scaffold |
| Decoration | Left to the customer |
We carry out structural repairs across North Wales, Cheshire and Wirral, and we also cover mid-Cheshire. The work varies with the building stock: in Chester and Wrexham it is mostly cracked solid-brick Victorian and Edwardian walls and the render over them; along the Wirral and North Wales coast it is salt-driven corrosion of the steel in concrete sills, lintels and balconies; across Deeside and Flintshire it is the inter-war concrete lintels and sills now reaching the end of their life, and the odd render crack below a parapet.
We cover North Wales, Cheshire and Wirral from the Deeside and Chester districts out to mid-Cheshire.
★★★★★ 5.0 · 150+ Google reviews
“Really pleased with the work Quirks Property Maintenance did for me. They replaced two lintels above my windows following a recommendation from my surveyor, stitched the brickwork and repointed everything beautifully. They did a great job and left everything really tidy afterwards. They were also very helpful and kind throughout, and were always happy to explain what they were doing and answer my questions, which I really appreciated. The finished work looks great and I’d definitely recommend them.”
Mrs S
“Effective, efficient and friendly service. Quirks carried out installation of a new steel lintel and step crack repair above my front door. They were methodical, explained the process to me at different stages and liaised with building control. They did a really great job!”
S C
“Mike and his team repaired my house after I had an issue with subsidence. They turned up when they said they would, there work is excellent and they were the best priced for the work I wanted doing. Will be using them again in the future. Thank you Mike”
Andrew Peters
More from us
What cracking means and when an engineer should look.
The lintel cluster: failed steel, concrete and timber lintels.
Damaged brickwork cut out and replaced, and repointing.
The overview page for everything structural.
Your questions
Hairline cracks through plaster or render usually are not. Cracks that step through the brickwork, that are wider at one end than the other, that you can fit a coin into, or that keep coming back after filling, need looking at before they are repaired. Send us photographs from close up and from across the room or street, with something for scale, and we will tell you which kind yours is.
For a crack with an obvious local cause — a removed fixing, impact damage, a failed lintel you can see — usually not; we quote the repair from your photographs. For cracks that suggest movement, or that have recurred, yes: the engineer establishes why before we repair the result, and the repair is designed around the cause. We tell you which when we see the photographs, and we do not stitch a crack that is still moving.
If the cause has been dealt with, the stitched masonry is tied together across the crack and the repair is designed not to open again. If the cause has not been found and is still active, any repair can crack again, which is why we are careful about which cracks we stitch without an engineer’s input.
Concrete that has blown off the surface, usually over a rusting steel bar, leaving a hollow or a brown-stained patch. It is common on inter-war and post-war concrete lintels, sills, balconies and canopies, and it gets worse each winter as water gets to more of the steel. The repair is to cut back, treat the steel and rebuild the section.
Sometimes, where the lintel is sound and only the surface has spalled. Where the lintel has cracked through, or the reinforcement has corroded badly, it is replaced. We tell you which from the photographs; replacements are covered on our lintel repair page.
Crack stitching and concrete surface repairs on their own usually do not. Replacing a lintel, or any repair that changes how a wall carries its load, is notified to Building Control, under the Regulations in England for Chester, Cheshire and Wirral and as applied in Wales for Flintshire, Wrexham and the rest of North Wales. We tell you which applies when we quote; the application is yours and we arrange the inspections where they are needed.
It depends on the length and number of cracks, whether the wall is rendered or exposed brick, whether an engineer’s design is needed, how much concrete has to be cut back, whether scaffold or access equipment is needed, and how much making good follows. Most jobs we can price from photographs — send yours on WhatsApp or by email and we’ll come back with a written quotation.
Written and reviewed by Michael Quirk, Director.
How it works
You don’t need to describe the problem down the phone. A photo tells us most of what we need.

Attach photographs of the crack or damage from close up and from a distance, with something for scale, and any engineer’s or surveyor’s report if you have one.
STRUCTURAL REPAIRS — SEND US PHOTOGRAPHS
